Trinic LLC  |  SKU: StageII-9lb

Stage II Blended Powder Hardener/Accelerator

Stage II Blended Powder Hardener/Accelerator is scientifically designed to increase early strength gains without affecting initial set. In the second stage, it can provide up to 1,000 psi per hour in strength gains, while in the third stage, it offers 50 psi per hour. Unlike ordinary accelerators, this product starts working only in the second stage, allowing for extended working time in the first stage.

$48.00
Shipping calculated at checkout.

Concrete goes through three distinctive hardening / curing stages. During the first stage, little or no strength is gained. During the second stage as much as 1,000 PSI per hour in strength gains can be realized, during the third stage strength gains of 50 PSI per hour happen. Ordinary accelerators start working the second they contact the cement, shortening the working time of stage one. Trinic Stage II accelerator / hardener is designed to start working during the second stage of strength development.

Features & Benefits

  • Blended powder hardener / accelerator admixture formulated specifically for the production of high performance thin section concrete.
  • Increases the early strength and ultimate strength of concrete
  • Offsets the retarding effects of high Plastisicer dosages while reducing pozzolan strength lag
  • Delivers excellent results in normal and cool conditions where very high next day strengths are required.
  • Curing times and heat requirements are significantly reduced while concrete quality is improved.
  • Does not contain calcium chloride or any other intentionally added chlorides and will not initiate or promote the corrosion of reinforcing steel
  • Less chance of warpage, curling, or cracking
  • A must for winter concrete
  • Increase strength gains as much as 50% overnight.
  • Designed to work with Trinic’s GFRC Admix

 
Back to top