PolyPoxy® 6005 a white, thixotropic, room temperature curing (RTV) surface coat epoxy. designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.
This non-sag formula has a pot life of 18 to 22 minutes, a demold time of 8 to 12 hours, and cures to a Shore D89 hardness.
WARNING: This product contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
TECHNICAL SPECIFICATIONS
- Mix Ratio by Weight: 1A:2B
- Mixed Viscosity: 2000 cP
- Cream Time: 25 sec.
- Rise Time: 1.5 min.
- Tack-Free Time: 3 min.
- Free-Rise Density: 3 lb/ft³
- Molded Density Range: 5-8 lb/ft³
- Demold Time: 10 min.
Kit Components
PolyPoxy 6005 |
Components |
2.75-lb kit includes |
2.33 lb of PolyPoxy 6005 Resin (~1 quart) 0.42 lb of PolyPoxy 6005 Hardener (~0.5 pint) |
9.34-lb kit includes |
8 lb of PolyPoxy 6005 Resin (~1 gallon) 1.34 lb of PolyPoxy 6005 Hardener (~1 quart) |
53-lb kit includes |
45 lb of PolyPoxy 6005 Resin (~5 gallons) 8 lb of PolyPoxy 6005 Hardener (~1 gallon) |
