Polytek Development Corp  |  SKU: PGSPRAY35U80

Polygel® Spray 35 Rubber - 80-lb kit

$689.00
Shipping calculated at checkout.

Polygel® Spray 35 is a Shore A35, spray-on, polyurethane liquid mold rubber designed for making thin, stretchy, flexible molds of larger, complex originals. When low-viscosity Part A and Part B are mixed using a portable Plas-Pak sprayer or more sophisticated spray equipment, the mixture self-thickens to a creamy consistency ideal for quickly creating blanket or glove molds of complex objects. Polygel® Spray rubbers allow molds to be made in one application. For a self-thickening brush-on rubber for smaller mold making projects, consider Polygel® 35 Brush-On Rubber.

WARNING: This product can expose you to chemicals including Toluene diisocyanate (TDI), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 


FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS
  • Mix Ratio by Volume: 1A:1B
  • Mix Ratio by Weight: 1A:1B
  • Shore Hardness: A35
  • Working Time: 10 min.
  • Demold Time: 16 hr.
  • Cured Color: Light Blue, Varies
  • Specific Volume: 27.5 in³/lb
  • Specific Gravity: 1.06
  • Elongation: 627 %
  • Tensile Strength: 507 psi
  • Die C Tear Strength: 71 pli
  • Notes: The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected.
  • Foundry Waxes: Certain foundry waxes can cause excessive oiling in Polygel® rubbers; this is the case when liquid Polygel® is applied to the foundry wax and when the foundry wax is poured into cured Polygel® molds. Perform a small test cure to ensure compatibility.

Kit Components
Polygel® Brush-On 35 Rubber Components
80-lb kit includes 40 lb of Polygel Spray 35 Part A (~5 gal)
40 lb of Polygel Spray 35 Part B (~5 gal)


  

LOOKING FOR LARGER SIZES (E.G., DRUM KITS)?

Contact us at 877-935-8906 or info@concretedecor.net for help.

Polygel® Spray 35 Rubber - 80-lb kit Polytek Development Corp 80-lb kit
Polytek Development Corp

Polygel® Spray 35 Rubber - 80-lb kit

$689.00

Polygel® Spray 35 is a Shore A35, spray-on, polyurethane liquid mold rubber designed for making thin, stretchy, flexible molds of larger, complex originals. When low-viscosity Part A and Part B are mixed using a portable Plas-Pak sprayer or more sophisticated spray equipment, the mixture self-thickens to a creamy consistency ideal for quickly creating blanket or glove molds of complex objects. Polygel® Spray rubbers allow molds to be made in one application. For a self-thickening brush-on rubber for smaller mold making projects, consider Polygel® 35 Brush-On Rubber.

WARNING: This product can expose you to chemicals including Toluene diisocyanate (TDI), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 


FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS

Kit Components
Polygel® Brush-On 35 Rubber Components
80-lb kit includes 40 lb of Polygel Spray 35 Part A (~5 gal)
40 lb of Polygel Spray 35 Part B (~5 gal)


  

LOOKING FOR LARGER SIZES (E.G., DRUM KITS)?

Contact us at 877-935-8906 or info@concretedecor.net for help.

Unit Size

  • 80-lb kit
View product