Oil & Grease Stain Remover

PROSOCO® Oil and Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. Just pour Oil & Grease Stain Remover on the embedded stain. It spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed.

As the poultice dries, it pulls the contaminants out of the substrate, capturing them in its highly absorbent blend of batter-thick surfactants, solvents and powders. After a 5–8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal.

Features and Benefits

• Works on concrete, pavers, block, stone, tile and brick.
• Removes motor oil, brake and power-steering fluid, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
• Works on old, deeply-set stains.
• Easy to use. No mixing or scrubbing needed.

TECHNICAL DATA

• SHELF LIFE: 2 years in tightly sealed, unopened container
• FORM: White, viscous liquid; slight citrus fragrance
• VOC CONTENT: 4% maximum
• PH: 10.5
• COVERAGE RATE: Approximately 2-3 sq ft/qt, Approximately 8-12 sq ft/gal
• FREEZE POINT: 32° F (0° C)
• FLASH POINT: >200° F (>93° C) ASTM D 3278
• TOTAL SOLIDS: Non-applicable
• WT/GAL: 8.75 lbs
• AVAILABLE SIZES: 1-qt, 1-gal, 5-gal