MPC-100 Clear Epoxy Resin Coating for Floors & Counter Tops, 100% Solids, Self Leveling - 3 Gallon Kit

MPC-100 is a 2-component, 100% solids, self-leveling, and high-build epoxy floor coating. It is designed to be used as a protective floor coating on concrete, over an existing epoxy coating, or to create metallic/decorative flooring systems. It can also be used as the binder component for resurfacing or patching surfaces exposed to severe and aggressive industrial environments.

MPC-100 is a specifically formulated cycloaliphatic coating that reduces water spotting and amine blushing while providing excellent adhesion, abrasion, impact, and chemical resistance. This coating contains no solvent, is compliant with the CFIA regulations for indirect food contact, and meets the VOC regulations limit of under 100 g/L for architectural floor coatings.

Areas of application

• Industrial Use - Garages; Warehouses; Airports and hangars; Processing and manufacturing plants
• Commercial Use - Shopping malls and boutiques; Hotels; Offices; Showrooms; Restaurants; Hospitals; Schools; Community centers, Bar Tops, Table Tops.
• Residential Use – Entrances and hallways; basements; entertainment rooms; bathrooms; kitchens and living rooms; outdoors spaces and pool outlines, Table Tops.

PRODUCT RESTRICTIONS

• Not recommended for application at temperatures below 10°C / 50°F or above 30°C / 86°F.
• Ambient humidity of the surroundings should not exceed 85% during application and during the curing process.
• Substrate must be clean, sound, and dry.
• Substrate temperature must be 3°C (5.5°F) above the measured dew point.
• Humidity content of substrate must be < 4% at the time of application.
• Do not apply on porous surfaces where a transfer of humidity may occur during the application.
• Applying this product on a substrate without a moisture barrier may risk delamination due to hydrostatic pressure.
• Freshly applied product must be protected against moisture, condensation, and water for at least 48 hours.
• Surface discoloration of the product may occur when exposed to UV rays.
• Exposure during the curing stage of the coating to the by-products of propane combustion may cause discoloration (amine blushing)

MPC-100 A - Properties:

• Physical State / Appearance / Color: Transparent liquid, clear
• Odor: Odorless to mild
• Odor Threshold: Not Available
• Flash Point (closed cup): > 93 °C
• Viscosity: 1200-1400 CPS
• Vapor Pressure: Not Available
• Vapor Density:  Not Available
• Relative Density:1.122 (g/ml)
• Solubility: Partial
• VOC: 45 g/l

MPC-100 B - Properties:

• Physical State / Appearance / Color: Transparent liquid, clear
• Odor:Slight amine odor
• Odor Threshold:Not Available
• Flash Point (closed cup): > 93 °C
• Viscosity: 200-400 CPS
• Vapor Pressure: Not Available
• Vapor Density:  Not Available
• Relative Density: 0.956 (g/ml)
• Solubility: Partial
• VOC: 224 g/l