Monkey Grip - Coarse Slip Resistant Additive for Concrete Sealers

MONKEY GRIP is a safe, non-toxic inert material that adds slip resistance to any concrete sealer. It is colorless and transparent so that it does not change the color or clarity of the coating.

• The clear transparent beads do not affect the color or transparency of a clear coat or a color seal coating.
• Inert: Monkey Grip is completely non-reactive. It will not affect the cure or drying time of acrylic or urethane coatings.
• Non-toxic: Monkey Grip is harmless to the environment and to the operator. If spilled, it can be hosed off with no harmful effects.

Application Instructions

Monkey Grip can be spread over the surface of the wet coating layer, taking care to spread it evenly over the surface. When the layer is dry, it should be over coated with a clear layer of sealer to lock in the additive and insure long wearing characteristics. Alternately, the Monkey Grip may be premixed with the sealer and stirred in thoroughly to a uniform consistency. This mixture may be sprayed, rolled or brushed over the surface. Always stir the mixture occasionally during application. When the treated layer is dry, overcoat it with a clear sealer coat. This locks in the additive and gives long wearing characteristics. Use one 2.5lb container to 5 gallons of sealer.