Lythic Day 1 Finishing Aid

DAY1 is a colloidal silica finishing aid that lubricates the surface for faster, easier finishing. DAY1 extends workable time under adverse conditions such as high wind, heat, or low humidity. DAY1 eliminates the need to add water to the surface, which can be detrimental to the surface performance of the slab. It can also be used to help finish shake-on hardeners in low bleedwater environments. Concrete with high cement, air, silica fume, or silica flower are easier to finish when DAY1 is applied.

Colloidal silica is at the heart of DAY1 technology. The amorphous silica reacts during the hydration of concrete to produce more cementitious material, translating into higher density and improved surface performance.

DAY1, applied during finishing, provides a number of long-term of benefits to cured concrete. DAY1 reduces surface evaporation, mitigating and reducing ASR, slab curling, and differential shrinkage. DAY1 also has densification properties to prevent dusting and reduces efflorescence in colored and standard concrete.

Features & Benefits

• Lubricates for more efficient surface finishing
• Reduces operator fatigue and trowel wear
• Extends workability under hot, dry, and windy conditions
• Aids application of shake-on hardeners
• Reduces efflorescence with colored & standard concrete
• Minimizes checking, crazing & scaling
• Hardens and densifies
• Increases impact and abrasion resistance
• Creates a less permeable surface
• Increases surface compressive strength by 20%-30%
• Reduces water vapor transmission *(MVER)
• Colloidal silica chemical reaction reduces CO2 migration
• Decreases potential for alkali silica reaction - *(ASR)
• Reduces potential for slab curling
• Concentrate and Ready-to-Use Formulas
• Will not increase the W/C ration
• Does not affect or change color

Coverage Rates

DAY1 will yield different results based on the jobsite conditions and usage demands. Before floating or troweling, test DAY1 on a sample section to determine appropriate application rate and technique before applying to the entire project area.

Use these coverage rates as a starting point to determine the necessary application rate. Coverages are based on a mixed ready-to-use (RTU) gallon of DAY1. DAY1 can be applied at multiple stages during finishing.

As Finishing Aid: 500 - 1000 square feet per gallon
Performance Concrete: 250 - 500 square feet per gallon


Also available in 55 gallon totes - call for pricing - 541-341-3390

---