DK 500 Clear 100% Solids Epoxy - 3 Gallon
DK 500 Epoxy is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, high build clear coat for a host of decorative concrete systems, a primer coat and binder coat for Dura-Kote Flakes and Metallics.
Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B, providing a premium, durable clear coating for colored or stained concrete and cement-based overlays. For unique, job-specific conditions, 2 other specialized part B’s are available, Premium UV and Premium CW. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable.
DK 500 Clear Epoxy is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.
Surecrete DK 500 Epoxy 100 Specs
- VOC Rating – 0 g/L Solids Content – 100%
- Shelf Life – 1 year in original unopened container
- Mixing Ratio – 2 parts A to 1 part B Pot Life – 10-20 minutes
- Ready for recoat – 6-8 hours (18+ hours at low temperatures)
- Light Duty Use – Approximately 16 hours (Up to 30 hours at low temperatures)
- Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures)
- Full Cure – 5-7 days (Up to 14 days at low temperatures)
- Appearance (cured) – High gloss sheen
- Appearance (wet) – Clear – Straw
- Color Water Resistance – Excellent, beads water
- Mechanical Stability – Excellent
- Light Stability – Yellows Odor – Sweet
- Adhesion – 400 PSI (concrete failure)
- Abrasion Resistance (Tabor) – 1,000 gm. load @ 500 cycles = 31 mg loss
- Compressive Strength – 9,000 PSI
- Application Temperature – 50 – 90 degrees Fahrenheit
Coverage
100-150 square feet per gallon per coat catalyzed product (varies widely based on application method)
