EasyFlo 120 Liquid Plastic

EasyFlo 120 Liquid Plastic is a two-part, liquid polyurethane resin that cures (RTV) to a white, Shore D65 plastic. This product has a simple 1A:1B mix ratio by volume and a fast demold time of 15 to 30 minutes. EasyFlo 120 is a super low-viscosity, pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application. For spray application, consider EasyFlo Spray FR.

EasyFlo 120 has a controlled gelling process that makes it a popular product for rotocasting or slush-casting hollow parts that are incredibly tough and lightweight. These hollow parts are often backfilled with rigid PolyFoam Casting Foam.

WARNING: This product can expose you to chemicals including Diisononyl phthalate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS

• Mix Ratio by Volume: 1A:1B
• Mix Ratio by Weight: 100A:90B
• Shore Hardness: D65
• Pot Life: 2-2.5 min.
• Demold Time: 15-30 min.
• Cured Color: Off-White
• Mixed Viscosity: 120 cP
• Specific Volume: 26.9 in³/lb
• Specific Gravity: 1.03
• Linear Shrinkage: 0.0065 in/in
• Elongation: 10.3 %
• Tensile Strength: 3,534 psi
• Elastic Modulus: 85,149 psi
• Flexural Modulus: 133,765 psi
• Flexural Strength, 5% Strain: 4,845 psi
• Heat Deflection Temp.: 146°F
• Max Exotherm: 200°F
• Note: The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected.