DK 400 Solvent-Based Polyurethane - Clear Gloss - 1 Gallon Kit

DK 400 is a 2 component, 51% solids, solvent acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance clear top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable.

As a vertical wall coating, it enhances anti-graffiti properties. DK 400 is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Coverage

Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)

 

Technical Specifications

• VOC Rating – less than 435 g/L
• Solids Content – 51%
• Pot Life – approximately 60 minutes
• Shelf Life – 1 year in original unopened container
• Ready for re-coat – 6-8 hours (18+ hours at low temperatures)
• Light Duty Use – 24 hours (Up to 48 hours at low temperatures)
• Heavy Traffic Ready – 3 days (Up to 5 days at low temperatures)
• Full Cure – 5-7 days (Up to 14 days at low temperatures)
• Appearance (cured) – Clear Gloss
• Appearance (wet) – Clear
• Water Resistance – Excellent, beads water
• Mechanical Stability – Excellent
• Light Stability – Excellent
• Mechanical Properties – Direct Impact – 30 inch/pounds; Reverse Impact – 6 inch/pounds
• Hardness – Pencil 4H, Konig 100
• Diluent – Hydrocarbons
• Odor – Solvent
• Application Temperature – 50 – 90 degrees Fahrenheit

---