DK 120 Fast Cure Clear Polyaspartic Coating - 1 Gallon Kit - Gloss

SureCrete’s Dura-Kote DK 120 is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete based overlays, or as a top finish coat on epoxy systems.

Dura-Kote 120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote 120's rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours.

It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Surecrete Dura-Kote DK-120 Specs

• VOC Rating – less than 330 g/L
• Solids Content – 67%
• Pot Life – approximately 30 minutes
• Shelf Life – 1 year in original unopened container
• Ready for re-coat – 1-2 hours (4-5 hours at low temperatures)
• Light Duty Use – 3-4 hours (24-36 hours at low temperatures)
• Heavy Traffic Ready – 24-36 hours (3-4 days at low temperatures)
• Full Cure – 1-2 days (Up to 7 days at low temperatures)
• Appearance (cured) – Clear Gloss
• Appearance (wet) – Clear
• Water Resistance – Excellent, beads water
• Mechanical Stability – Excellent
• Light Stability – Excellent
• Odor – Aromatic
• Application Temperature – 32 – 90 degrees Fahrenheit
• Gardener direct / Reverse impact – More than 160 inch pounds
• Taber Abrasion – 40-60 mg loss
• QUV – A – less than 5.0 at 2,000 hours
• Gloss Retention – More than 95% at 2,000 hours

 

Coverage

Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)

---