Polytek Development Corp  |  SKU: GEL10U2

PlatSil Gel-10 Silicone Rubber

$69.00
Shipping calculated at checkout.
PlatSil® Gel-10 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore A10 rubber. This silicone is most often used to make prosthetic appliances (in conjunction with Smith's Theatrical Prosthetic Deadener or PlatSil® Deadener LV), for lifecasting and mold making.

PlatSil® Gel-10 has been tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations) for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS
  • Mix Ratio by Weight: 1A:1B
  • Mix Ratio by Volume: 1A:1B
  • Shore Hardness: A10
  • Pour Time: 6 min.
  • Demold Time: 30 min.
  • Cured Color: Milky White
  • Mixed Viscosity: 15,000 cP
  • Specific Volume: 25 in³/lb
  • Specific Gravity: 1.1
  • Elongation: 970%
  • Tensile Strength: 228 psi
  • Die B Tear Strength: 80 pli
  • Die T Tear Strength: 27 pli
  • Cure Inhibition: Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.



Kit Components
PlatSil® Gel-10 Components
2-lb kit includes: 1 lb of PlatSil® Gel-10 Part A (~1 gallon)
1 lb of PlatSil® Gel-10 Part B (~1 gallon)
16-lb kit includes: 8 lb of PlatSil® Gel-10  Part A (~1 gallon)
8 lb of PlatSil® Gel-10 Part B (~1 gallon)
80-lb kit includes: 40 lb of PlatSil® Gel-10 Part A (~5 gallons)
40 lb of PlatSil® Gel-10 Part B (~5 gallons)

 

LOOKING FOR LARGER SIZES (E.G., DRUM KITS)?

Contact us at 877-935-8906 or info@concretedecor.net for help.

PlatSil Gel-10 Silicone Rubber Polytek Development Corp 2-lb kit
Polytek Development Corp

PlatSil Gel-10 Silicone Rubber

From $69.00
PlatSil® Gel-10 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore A10 rubber. This silicone is most often used to make prosthetic appliances (in conjunction with Smith's Theatrical Prosthetic Deadener or PlatSil® Deadener LV), for lifecasting and mold making.

PlatSil® Gel-10 has been tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations) for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS



Kit Components
PlatSil® Gel-10 Components
2-lb kit includes: 1 lb of PlatSil® Gel-10 Part A (~1 gallon)
1 lb of PlatSil® Gel-10 Part B (~1 gallon)
16-lb kit includes: 8 lb of PlatSil® Gel-10  Part A (~1 gallon)
8 lb of PlatSil® Gel-10 Part B (~1 gallon)
80-lb kit includes: 40 lb of PlatSil® Gel-10 Part A (~5 gallons)
40 lb of PlatSil® Gel-10 Part B (~5 gallons)

 

LOOKING FOR LARGER SIZES (E.G., DRUM KITS)?

Contact us at 877-935-8906 or info@concretedecor.net for help.

Size

  • 2-lb kit
  • 16-lb kit
  • 80-lb kit
View product
Back to top