Pro Seal 2500 Solvent-based for Concrete - 5 Gallon

Stone Edge Surfaces Pro Seal 2500 is a High Gloss, 25% solids, Pure Acrylic Solvent Based concrete sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete. Pro Seal 2500 is UV stable, non-yellowing, and is a very tough 100% pure acrylic sealer that will give your jobs a beautiful wet look that makes the colors “pop”. Pro Seal 2500 is NOT a cure-and-seal so concrete must be completely dry 48 to 72 hours for thin overlays and up to 28 days for ready-mix concrete, because it does not breath or allow out-gassing. Pro Seal 2500 is clear in color and is 700 VOC so make sure you can use it in your state. Pro Seal 2500 comes in a 5-gallon bucket, part number (FXC600)

Most Common Uses

Sealing of floors, driveways walkways and patios.

Application

Base/Coat Top Coat Gloss Sealer

Application Method: Roll on with nap roller or can be sprayed using a “Chapin” Extreme type all metal sprayer.

Working Time: Average 5 to 10 minutes

Coverage Rate

Approximately 1000 sq. ft.

Coverage rates vary depending on porosity and texture, and application method. Excessive build up should be avoided.

• Product Physical Properties
• Technical & Safety Data Sheets

• Pro Seal 2500 Meets the Following Physical Properties

  Best Application Temp Range: 40°F - 85°F
  Meets USDA AASHTO-M-148 DRIED COATING criteria for a Structural Surface that may come in contact with food
  Dry Time = 1 - 2 hours
  Recoat = 2 - 24 hours
  Wheel Traffic = 24 – 48 Hours
  Foot Traffic = 4 – 6 hours
  Gloss / Sheen = High Gloss
  Solvent Resistance =Minimal
  Concrete Adhesion = Excellent
  Solids = 25% 
  
  
  

•