Prosoco  |  SKU: 46024-01GALCS

Concrete Protector SB

Concrete Protector SB is a solvent-based, penetrating, reactive treatment that provides water, oil and stain repellency for every kind of finished concrete floor. It improves stain resistance and simplifies maintenance cleaning of interior and exterior, horizontal and vertical concrete surfaces. Concrete Protector SB is low-odor and VOC-compliant.

$677.76
Shipping calculated at checkout.

Consolideck® Concrete Protector SB is a penetrating, reactive treatment that provides water, oil and stain repellency for every kind of finished concrete floor. Treated surfaces retain their natural texture and breathability. Concrete Protector SB improves stain resistance and simplifies maintenance cleaning of interior and exterior, horizontal and vertical concrete surfaces. Solvent-based and low-odor, this VOC compliant protective treatment is easily applied with pump-up sprayers.

Features & Benefits

  • Resists oil and food stains, and repels water and water-related stains.
  • Works on floors previously treated with
  • Consolideck® LS®, LS/CS® or Blended Densifier
  • May be applied to surfaces previously treated with
  • Consolideck® LSGuard® or PolishGuard.
  • Appropriate for application to any cured concrete,
  • from steel troweled to highly polished.
  • Low-odor suitable for interior application to occupied buildings.
  • Fast drying – reduces down time.
  • Treated surfaces “breathe” – does not trap moisture.
  • Can be burnished.
  • Coverage rate higher than typical water repellents or other stain-resistant impregnators.
  • Re-coatable; penetrates and bonds to concrete previously treated with Concrete Protector SB – no stripping required.

Technical Specs

  • FORM: Clear, colorless liquid
  • SPECIFIC GRAVITY: 0.96
  • pH: not applicable
  • WT/GAL: 7.99 lbs
  • ACTIVE CONTENT: 13%
  • TOTAL SOLIDS: 13% ASTM D 2369
  • VOC CONTENT: <100 g/L
  • FLASH POINT: >170° F (>77° C) ASTM D 3278
  • FREEZE POINT: <–22° F (<–30° C)
  • SHELF LIFE 1 year in tightly sealed, unopened container

Typical Coverage Rates

Variations in concrete quality, porosity, job site conditions, temperature and relative humidity will affect coverage rates and drying times. Calculate the target coverage rate by testing a representative section of the prepared surface using the published application instructions.

Coverage is in square feet/meters per gallon

Steel Troweled Concrete:
1500–3000 sq.ft. (139–279 sq.m.)
Mechanically Honed & Polished Concrete:
2500-4000 sq. ft. (232 – 372 sq. m.)
LSGuard or PolishGuard Treated Concrete Floors:

4000–5000 sq.ft. (372–465 sq.m.)

Applications to highly polished floors yield the highest coverage rates. Two thin applications achieve better results than one heavy coat.

Pallet Pricing also available - call 541-341-3390 for details

   
Back to top