Skip to content

Pro Bond (Base Coat)


Stone Edge Surfaces Pro Bond is a commercial grade, heavily polymerized, multi-use, base coat and extreme bonding Single Component just add water underlayment and repair concrete mix.

Pro Bond does NOT require Primer.

Stone Edge Surfaces Pro Bond is used as the base coat in several Deck and Balcony Waterproofing systems and can be troweled or pumped.

COMMERCIAL: Pro Bond has been tested and certified to be applied over SpexCrete 450 on Flat Roof layered installations

(3″ SpexCrete with 1/4″ to 1/2″ Pro Bond adhering to the top of the SpexCrete material and then Hot Mop of other roofing material applied over Pro Bond).

Pro Bond can be troweled with and without added sand to create slope. Pro Bond is used as a repair concrete to fill, rebuild, repair and smooth spalled and damaged concrete areas before applying an overlay.

Pro Bond is also used for repairing larger “dead” cracks and can be used in a crack bridge application over “live” cracks.

Pro Bond can go from feather thin to 3+ inches deep, and can be applied with a loop roller as a scratch coat in swimming pool refurbishment.

Pro Bond, bonds easily to Stone Edge Surfaces and other concrete overlay mixes as well as concrete, plaster, drywall, Styrofoam, brick, block, tile gunite and more.

Pro Bond is used as a base coat for waterfall, cliff face, and rock formations. If you use Pli-Dek, Multicoat, Westcoat or other waterproof decking systems, or if you use PermaKote or Multicoat Scratch Kote when refurbishing swimming pools…you will love Pro Bond!