Dust Muzzle for Tuck Pointing and Crack Chasing
The Dust Muzzle for Crack Chasing ,Tuck Pointing & Cutting is a universal Dust Muzzle that can be used for cutting, tuck pointing and crack chasing with all 4"-5" cutting wheels. It can be used with diamond blades as well as carbide saw blades to remove silica dust, asbestos and other toxic dusts from the workplace.
How the Dust Muzzle for Crack Chasing, Tuck Pointing & Cutting works
The Dust Muzzle for Crack Chasing, Tuck Pointing and Cutting has a patented, adjustable set of steel adapters that allow it to be attached to virtually any 4"-5" pneumatic or electric angle grinder with a bearing housing diameter between 1 5/8" and 2" in diameter.
Vertical adjustment for the depth of cut is achieved by adjusting the metal depth guide on the right side of the Dust Muzzle for Crack Chasing, Cutting & Tuck Pointing guard.
The Dust Muzzle for Crack Chasing, Cutting & Tuck Pointing guard can be rotated to a number of different positions to suit the operator's preference.
The Dust Muzzle for Crack Chasing, Cutting & Tuck Pointing is excellent for crack chasing, tuck pointing, cutting fiberglass, scoring concrete, grout removal and decorative work.
**Note: Use the attached chart to check compatibility. If you don't see your grinder, call for technical support at 877 223-2154.
OSHA 2017 Silica Dust Requirements specify a HEPA vacuum with 110 CFM for diamond wheels 4 1/2" in diameter.
To be compliant, the contractor will a need vacuum with the following specs.
110CFM Vacuum System
Fits virtually all 4"-5" electric & pneumatic right angle grinders
Adjustable to any depth
Excellent for diamond blades, crack chasers, tuck pointers and carbide saw blades.
Up to 99% efficient when used with a 2hp industrial vacuum system