Skip to content

Colored Floor Polyaspartic Concrete Coating

Color: Choose One

One Day Concrete Garage Floor Flake System with Colored Polyaspartic ColorTec 180

SureCrete’s ColorTec 180™ is a specially formulated 88% solids, hybrid solvent based pigmented polyaspartic for professional use only. Unlike many polyaspartics, it is a high-performance coating with a user-friendly pot life of approximately 10 minutes and the ability to create a moderate build (7 mil cured) base coat for full broadcast flake system. Turnaround time for a floor may be as little as 6 – 8 hours. Dura-Kote ColorTec 180 provides a low VOC (less than 150 g/L), penetrating, film forming, high gloss, UV stable, fade resistant pigments for a colored base coat on a flake floor system. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Surecrete Pigmented ColorTec 180™ Specs

  • Coverage – Approximately 150-200 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
  • VOC Rating – less than 150 g/L
  • Solids Content – 88%
  • Pot Life – approximately 10 minutes
  • Shelf Life – 1 year in original unopened container
  • Ready for recoat – 2-3 hours (6-8 hours at low temperatures)
  • Light Duty Use – 4-6 hours (Up to 24 hours at low temperatures)
  • Heavy Traffic Ready – 48-72 hours (4-6 days at low temperatures)
  • Full Cure – 48-72 hours (Up to 7 days at low temperatures)
  • Appearance (cured) – Colored Gloss Sheen
  • Appearance (wet) – Varies by Color Selection
  • Water Resistance – Excellent, beads water
  • Mechanical Stability – Excellent
  • Light Stability – Excellent
  • Odor – Aromatic
  • Application Temperature – 32 – 90 degrees Fahrenheit
  • Gardener direct / Reverse impact – More than 160-inch pounds
  • Taber Abrasion – 40-60 mg loss
  • Gloss Retention – More than 95% at 2,000 hours

ColorTec 180 Tech Data Sheet

ColorTec 180 A SDS Sheet

ColorTec 180 B SDS Sheet

ColorTec 180 Color Chart

Surecrete Product Page